TJA1040T/CM,118 Integrated Circuit Chip new & original High speed CAN transceiver
electronics ic chip
,integrated circuit ic
TJA1040
High speed CAN transceiver
FEATURES
• Fully compatible with the ISO 11898 standard
• High speed (up to 1 MBaud)
• Very low-current standby mode with remote wake-up capability via the bus
• Very low ElectroMagnetic Emission (EME)
• Differential receiver with high common-mode range for ElectroMagnetic Immunity (EMI)
• Transceiver in unpowered state disengages from the bus (zero load)
• Input levels compatible with 3.3 V and 5 V devices
• Voltage source for stabilizing the recessive bus level if split termination is used (further improvement of EME)
• At least 110 nodes can be connected
• Transmit Data (TXD) dominant time-out function
• Bus pins protected against transients in automotive environments
• Bus pins and pin SPLIT short-circuit proof to battery and ground
• Thermally protected.
GENERAL DESCRIPTION
The TJA1040 is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. It is primarily intended for high speed applications, up to 1 MBaud, in passenger cars. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.
The TJA1040 is the next step up from the TJA1050 high speed CAN transceiver. Being pin compatible and offering the same excellent EMC performance, the TJA1040 also features:
• An ideal passive behaviour when supply voltage is off
• A very low-current standby mode with remote wake-up capability via the bus.
This makes the TJA1040 an excellent choice in nodes which can be in power-down or standby mode in partially powered networks.
QUICK REFERENCE DATA
| SYMBOL | PARAMETER | CONDITIONS | MIN. | MAX. | UNIT |
| VCC | supply voltage | operating range | 4.75 | 5.25 | V |
| ICC | supply current | standby mode | 5 | 15 | µA |
| VCANH | DC voltage on pin CANH | 0 < VCC < 5.25 V; no time limit | -27 | +40 | V |
| VCANL | DC voltage on pin CANL | 0 < VCC < 5.25 V; no time limit | -27 | +40 | V |
| VSPLIT | DC voltage on pin SPLIT | 0 < VCC < 5.25 V; no time limit | -27 | +40 | V |
| Vesd | electrostatic discharge voltage |
Human Body Model (HBM) pins CANH, CANL and SPLIT all other pins |
-6 -4 |
+6 +4 |
kV kV |
| tPD(TXD-RXD) | propagation delay TXD to RXD | VSTB = 0 V | 40 | 255 | ns |
| Tvj | virtual junction temperature | -40 | +150 | °C |
BLOCK DIAGRAM
Stock Offer (Hot Sell)
| Part NO. | Q'ty | MFG | D/C | Package |
| MC9S08QD4CSC | 5760 | FREESCALE | 14+ | SOP |
| MC145443P | 5750 | ON | 10+ | DIP |
| MC44BC375U | 5744 | FREESCALE | 13+ | SOP |
| MAX6363LUT29-T | 5730 | MAXIM | 15+ | SO-23 |
| MAX1722EZK-T | 5726 | MAXIM | 15+ | SOT |
| MC145428P | 5725 | MOT | 13+ | DIP |
| XL6005E1 | 5712 | XLSEMI | 15+ | TO252-5L |
| LTC1688CS#TR | 5702 | LINEAR | 14+ | SOP |
| MC908QY4ACPE | 5700 | FREESCALE | 13+ | DIP |
| MC145406P | 5700 | ON | 10+ | DIP |
| MX25L1605DM1I-12G | 5697 | MXIC | 08+ | SOP |
| LT1963AES8 | 5693 | LINEAR | 15+ | SOP-8 |
| MPX5010DP | 5690 | FREESCALE | 14+ | SIP |
| MC908JB8ADWE | 5677 | FREESCALE | 05+ | SOP-28 |
| MC14538BCL | 5675 | MOT | 14+ | DIP |
| MX25L4006EM1I-12G | 5670 | MXIC | 13+ | SOP |
| MAX690ACSA+ | 5670 | MAXIM | 12+ | SOP |
| PIC16F1827-I/SO | 5664 | MICROCHIP | 15+ | SOP |
| LT1027ECS8-5#PBF | 5664 | LINEAR | 12+ | SOIC-8 |
| MAX6006BESA+ | 5660 | MAXIM | 14+ | SOP |
| L78M15ABDT-TR | 5656 | ST | 12+ | TO-252 |
N74F07N,602 Electronic IC Chip NEW AND ORIGINAL STOCK
N74F193N,602 Electronic IC Chip NEW AND ORIGINAL STOCK
74ABT240D,602 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
N74F07N,602 Electronic IC Chip NEW AND ORIGINAL STOCK |
Buffer, Non-Inverting 6 Element 1 Bit per Element Open Collector Output 14-DIP
|
|
|
|
N74F193N,602 Electronic IC Chip NEW AND ORIGINAL STOCK |
Counter IC Binary Counter 1 Element 4 Bit Positive Edge 16-DIP
|
|
|
|
74ABT240D,602 NEW AND ORIGINAL STOCK |
Buffer, Inverting 2 Element 4 Bit per Element 3-State Output 20-SO
|