Send Message
Home > products > Power Management ICs > FAN7530MX Integrated Circuit Chip Critical Conduction Mode PFC Controller

FAN7530MX Integrated Circuit Chip Critical Conduction Mode PFC Controller

manufacturer:
ON Semi / Catalyst Semi
Description:
PFC IC Critical Conduction (CRM), Discontinuous (Transition) 8-SOIC
Category:
Power Management ICs
Price:
Negotiate
Payment Method:
T/T, Western Union, Paypal
Specifications
Peak Drive Output Current:
+500/-800 MA
Detector Clamping Diodes:
±10 MA
Error Amplifier, MOT, CS Input Voltages:
-0.3 To 6 V
Operating Junction Temperature:
150 °C
Operating Temperature Range:
-40 To 125 °C
Storage Temperature Range:
-65 To 150 °C
Highlight:

integrated circuit ic

,

integrated circuit components

Introduction

 

FAN7530

Critical Conduction Mode PFC Controller

 

Features „

  • Low Total Harmonic Distortion (THD) „
  • Precise Adjustable Output Over-Voltage Protection „
  • Open-Feedback Protection and Disable Function „
  • Zero Current Detector „
  • 150µs Internal Start-up Timer „
  • MOSFET Over-Current Protection „
  • Under-Voltage Lockout with 3.5V Hysteresis „
  • Low Start-up (40µA) and Operating Current (1.5mA) „
  • Totem Pole Output with High State Clamp „
  • +500/-800mA Peak Gate Drive Current „
  • 8-Pin DIP or 8-Pin SOP

 

Applications „

  • Adapter „
  • Ballast „
  • LCD TV, CRT TV „
  • SMPS

Related Application Notes „

  • AN-6027 - Design of Power Factor Correction Circuit Using FAN7530

 

Description

The FAN7530 is an active power factor correction (PFC) controller for boost PFC applications that operates in critical conduction mode (CRM). It uses the voltage mode PWM that compares an internal ramp signal with the error amplifier output to generate MOSFET turn-off signal. Since the voltage mode CRM PFC controller does not need rectified AC line voltage information, it saves the power loss of the input voltage sensing network necessary for the current mode CRM PFC controller.

 

FAN7530 provides many protection functions, such as over voltage protection, open-feedback protection, overcurrent protection, and under-voltage lockout protection. The FAN7530 can be disabled if the INV pin voltage is lower than 0.45V and the operating current decreases to 65µA. Using a new variable on-time control method, THD is lower than the conventional CRM boost PFC ICs.

 

 

Absolute Maximum Ratings

 

The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. TA=25°C, unless otherwise specified.

 

Symbol Parameter Value Unit
VCC Supply Voltage VZ V
IOH, IOL Peak Drive Output Current +500/-800 mA
Iclamp Driver Output Clamping Diodes VO>VCC or VO<-0.3V ±10 mA
Idet Detector Clamping Diodes ±10 mA
VIN Error Amplifier, MOT, CS Input Voltages -0.3 to 6 V
TJ Operating Junction Temperature 150 °C
TA Operating Temperature Range -40 to 125 °C
TSTG Storage Temperature Range -65 to 150 °C
VESD_HBM ESD Capability, Human Body Model 2.0 kV
VESD_MM ESD Capability, Machine Model 300 V
VESD_CDM ESD Capability, Charged Device Model 500 V

 

 

Typical Application Diagrams

 

                    Figure 1. Typical Boost PFC Application

 

 

Internal Block Diagram

 

                                           Figure 2. Functional Block Diagram of FAN7530

 

 

Pin Assignments

 

         Figure 3. Pin Configuration (Top View)

 

 

Related Products
Image Part # Description
Fast Charge 4.0mV 18V DIP8 Battery Controllers IC MC33340P

Fast Charge 4.0mV 18V DIP8 Battery Controllers IC MC33340P

Charger IC Multi-Chemistry 8-PDIP
DIP TO92 10mA Undervoltage Sensing Circuit IC MC34064P-5RAG

DIP TO92 10mA Undervoltage Sensing Circuit IC MC34064P-5RAG

Supervisor Open Drain or Open Collector 1 Channel TO-92 (TO-226)
MC34063ADR2G Boost Switching Regulator Positive / Negative Adjustable 1.25V

MC34063ADR2G Boost Switching Regulator Positive / Negative Adjustable 1.25V

Buck, Boost Switching Regulator IC Positive or Negative Adjustable 1.25V 1 Output 1.5A (Switch) 8-SOIC (0.154", 3.90mm W
UC3845BD1R2G Integrated Circuit Chip High Performance Current Modded Controllers

UC3845BD1R2G Integrated Circuit Chip High Performance Current Modded Controllers

Boost, Flyback Regulator Positive, Isolation Capable Output Step-Up, Step-Up/Step-Down DC-DC Controller IC 8-SOIC
STK681-332-E Electronic IC Chip NEW AND ORIGINAL STOCK

STK681-332-E Electronic IC Chip NEW AND ORIGINAL STOCK

Motor Driver Power MOSFET Parallel
STK681-352-E Electronic IC Chip NEW AND ORIGINAL STOCK

STK681-352-E Electronic IC Chip NEW AND ORIGINAL STOCK

Motor Driver Power MOSFET Parallel
UC2844BD1R2G Electronic IC Chips HIGH PERFORMANCE CURRENT MODE CONTROLLERS

UC2844BD1R2G Electronic IC Chips HIGH PERFORMANCE CURRENT MODE CONTROLLERS

Boost, Flyback Regulator Positive, Isolation Capable Output Step-Up, Step-Up/Step-Down DC-DC Controller IC 8-SOIC
MC78L09ABDR2G Electronic IC Chip NEW AND ORIGINAL STOCK

MC78L09ABDR2G Electronic IC Chip NEW AND ORIGINAL STOCK

Linear Voltage Regulator IC Positive Fixed 1 Output 100mA 8-SOIC
Send RFQ
Stock:
MOQ:
10pcs