Send Message
Home > products > Flash Memory IC Chip > TS5A12301EYFPR Ethernet Switch IC Analog Switch ICs IEC Lev 4 ESD Prot 0.75Ohm SPDT Ana Sw

TS5A12301EYFPR Ethernet Switch IC Analog Switch ICs IEC Lev 4 ESD Prot 0.75Ohm SPDT Ana Sw

manufacturer:
Manufacturer
Description:
1 Circuit IC Switch 2:1 750mOhm 6-DSBGA
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Height:
0.33 Mm
LeCM GROUPh:
1.2 Mm
Width:
0.8 Mm
Subcategory:
Switch ICs
Supply Voltage - Max:
5.5 V
Supply Voltage - Min:
2.25 V
Highlight:

ethernet transceiver ic

,

fast ethernet switch chip

Introduction

TS5A12301EYFPR Ethernet Switch IC Analog Switch ICs IEC Lev 4 ESD Prot 0.75Ohm SPDT Ana Sw

 

1 Features

  • Low ON-State Resistance (0.75 Ω)
  • Low Charge Injection

  • Excellent ON-State Resistance Matching

  • Isolation in Power-Down Mode, VCC = 0

  • Specified Break-Before-Make Switching

  • 2.25-V to 5.5-V Power Supply (VCC)

  • 6-MΩ Input Pulldown Allows Control Input (IN) to Be Unconnected

  • 1.8-V Compatible Control Input Threshold Independent of VCC

  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II

  • ESD Performance Tested Per JESD 22

    • – 3000-V Human-Body Model (A114-B, Class II)

    • – 1000-V Charged-Device Model (C101)

  • ESD Performance COM Port to GND

– 8000-V Human-Body Model (A114-B, Class II)

 

2 Applications

• Cell Phones
• PDAs
• Portable Instrumentation

• MP3 Players
• Portable Media Players

 

3 Description

The TS5A12301E device is a bidirectional, 1-channel, single-pole double-throw (SPDT) analog switch that is designed to operate from 2.25 V to 5.5 V. The device offers a low ON-state resistance with excellent channel-to-channel ON-state resistance matching and the break-before-make feature to prevent signal distortion during the transferring of a signal from one path to another.

The device has excellent total harmonic distortion (THD) performance and consumes very low power. These features make this device suitable for portable audio applications. The control input (IN) pin can be connected to low-voltage GPIOs, allowing it to be controlled by 1.8-V signals.

The TS5A12301E has ±15-kV air-gap discharge and ±8-kV contact discharge ESD protection for the COM port to GND, which makes it compliant with the IEC Level 4 ESD standard (IEC 61000-4-2).

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

TS5A12301E

DSBGA (6)

1.16 mm × 0.76 mm

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
Contact us